[vc_row][vc_column][vc_column_text]Sunmodule Plus SWA xxx poly
Sunmodule Plus SWA xxx mono (black)
Sunmodule Protect SWA xxx mono (black)
Sunmodule Bisun SWA xxx duo (black/clear)[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/2″][vc_column_text]DANGER! Electric shock The connection of two or more modules in series results in the accumulation of voltage and imposes danger. Do not insert electrically conductive parts into connectors! Do not attach solar modules and wiring with wet connectors! Make sure to work with dry tools and under dry working conditions! Work on live parts When working on wiring, use and wear protective equipment (insulated tools, insulated gloves, etc.)!
ATTENTION Do not use damaged modules. Do not dismantle modules. Do not remove any parts or nameplates fitted by the manufacturer. Do not apply paint or adhesives to the module, nor work on it with sharp objects.
WARNING! Arcing Modules generate direct current (DC) when exposed to light. When breaking a closed circuit, a dangerous arc may be generated. Do not cut any live wires. Safe installation Do not carry out installation work in strong winds. Secure yourself and other persons against falling. Secure work materials against dropping. Ensure a safe working environment so as to prevent accidents. Fire protection/explosion protection Modules must not be installed in the vicinity of highly flammable gases, vapors or dusts (e.g. filling stations, gas tanks, paint spraying equipment). The safety instructions for other system components must also be followed. Make sure to comply with local standards, building regulations and accident prevention regulations during installation. For roof installation, modules must be mounted on a fire-resistant roof covering rated for the application. Unpacking and intermediate storage Do not use the junction box as a handle.
Do not place modules roughly on hard floor or on their corners. Do not place modules on top of each other. Do not step or stand on modules. Do not place any objects on modules. Store modules in a dry place. Grounding of module and frame We recommend ensuring the functional grounding of the module metal frame. If an exterior lightning protection system is already provided, the PV system has to be integrated into the protection concept against direct lightning stroke. Local standards shall be observed.
Grounding in the US and Canada The modules can be connected at the holes provided in the flange. The lug must be a tin-coated copper lug, silver in color. Do NOT use a bare copper lug, which is brown. Any grounding method and components listed according to NEC requirements are also acceptable in the US and Canada. Table: Recommended components for grounding in the US and Canada Item Manufacturer/Description Tightening torque Lay-In lug 1 Burndy CL501TN QIKLUG Bolt 2 #10-32, SS 25 in-Ibf (2.9 Nm) Serrated washer 3 #10, SS Nut 4 #10-32, SS Components available as CL501DBKIT1
General Information This module is rated for use in application class A according to IEC 61730. For the electrical ratings please refer to the datasheet. Under normal conditions, a photovoltaic module is likely to experience conditions that produce more current and/or voltage than reported at standard test conditions. Accordingly, the values of ISC and VOC marked on this module should be multiplied by a factor of 1,25 when determining component voltage ratings, conductor current ratings, fuse sizes, and size of controls connected to the PV output. Specific Information (U.S. and Canada) The fire rating of this module is valid only when mounted in the manner specified in the mechanical mounting instructions. The module is considered to be in compliance with UL 1703 only when the module is mounted in the manner specified by the mounting instructions below. A module with exposed conductive parts is considered to be in compliance with UL 1703 only when it is electrically grounded in accordance with the instructions presented below and the requirements of the National Electrical Code. Where common grounding hardware (nuts, bolts, star washers, spilt-ring lock washers, flat washers and the like) is used to attach a listed grounding/bonding device, the attachment must be made in conformance with the grounding device manufacturer’s instructions. Common hardware items such as nuts, bolts, star washers, lock washers and the like have not been evaluated for electrical conductivity or for use as grounding devices and should be used only for maintaining mechanical connections and holding electrical grounding devices in the proper position for electrical conductivity. Such devices, where supplied with the module and evaluated
[/vc_column_text][/vc_column][vc_column width=”1/2″][vc_column_text]through the requirements in UL 1703, may be used for grounding connections in accordance with the instructions provided with the module. The electrical characteristics are within ±10 percent of the indicated values of ISC, VOC, and Pmax under standard test conditions (irradiance of 1000 W/m², AM 1.5 spectrum, and a cell temperature of 25°C (77°F)). Under normal conditions, a photovoltaic module is likely to experience conditions that produce more current and/or voltage than reported at standard test conditions. The requirements of the National Electrical Code (NEC) in Article 690 section II shall be followed to address these increased outputs. In Canada the installation shall be in accordance with CSA C22.1, Safety Standard for Electrical Installations, Canadian Electrical Code, Part 1. Suitable ambient conditions Artificially concentrated sunlight shall not be directed on the module or panel. The module must neither be immersed in water nor be exposed to continuous spraying (e.g. by fountains). Exposure to salt or sulfur (sulfur sources, volcanoes) implies a risk of corrosion. The module must not be used for maritime (e.g. boats) or automotive (vehicles, trailers, etc.) purposes. The module must not be exposed to extraordinary chemical loads (e.g. emissions from manufacturing plants). If the modules are installed on stables, a distance of 3.28 ft (1 m) to ventilation openings shall be ensured; the modules shall not be used as a direct roof panel on stables. Appropriate installation situation Make sure that the module meets the technical requirements of the overall system. Other system components should not exert any adverse mechanical or electrical influences on the module. Modules may bend under high loads. For this reason, sharp-edged fixing elements or other sharp objects (e.g. cable ties on mounting sections) must not be mounted near the module back side. When using a string inverter, for modules connected in series, only modules of the same amperage rating may be used together. For modules connected in parallel, modules with the same voltage ranges must be used together. The modules must not be operated at a higher voltage than the permissible system voltage. The frame corner element is intended for water drainage and must not be blocked. For system documentation, please note the serial numbers. Optimum installation In order to avoid performance losses, all modules connected in series should be arranged with the same orientation and tilt angle. The modules should be installed in an all-season shadow-free area. Even partial shadowing results in yield losses and is to be avoided. Ventilation of the module back side will prevent heat build-up adversely affecting performance. Mounting The modules must be securely fixed at a minimum of 4 locations on the substructure. Fixing is only allowed in designated areas. When using “Top-Down” clamps use high-quality extruded aluminum or stainless steel clamps or stamped stainless steel clamps. Insure that the mounting system and clamps meet the design requirements of the system. In regards to “Top-Down” mounting methods, the maximum clamping pressure is 50 N/mm² (15 ft-lb). Do not use formed (bent) clamps! Do not drill any holes into the module. Use corrosion-proof fixing material. For bottom-mounting hardware use 8 to 9mm (1/4“ or 5/16“) diameter bolts that are less than 25 mm (1“) in length. The head of the bolt must face the module backsheet. Torque specifications are set by the system engineer. Electrical connection The modules are provided with factory-assembled cables and connectors . Do not open the junction box in any case. Connectors may only be connected under dry conditions. Make sure to avoid gaps in a plugged connection. Only solar cables with an adequate cross-section (2.5 mm² or 14 AWG minimum) and appropriate connectors may be used for connecting the modules. Cables should be attached to the installation system by means of UV-resistant cable ties. Exposed cables should be protected against sunlight and damage by suitable precautions. Check that wiring is correct (polarity!) prior to starting the inverter. SolarWorld Sunmodules are equipped with Amphenol UTX H4 connectors; connect ONLY Amphenol Helios H4 or Amphenol UTX H4 connectors with the module. Cleaning In general, the modules do not need any cleaning if the tilt angle is sufficient (> 15°; self-cleaning by rain). In case of heavy soiling, we recommend cleaning the modules with plenty of water (tap water or deionized water) without any cleaning agents. If necessary, a soft cleaning device (e. g. sponge, soft brush with split bristles) maybe be used. In case of soiling by dust or sand the modules can be cleaned with a soft brush without using water. Never scrape or rub off dirt; this may result in microscratches. Maintenance We recommend regular inspections of the system to ensure that: 1. All fixtures are securely tightened and corrosion-free; 2. Wiring is securely connected, properly arranged and free of corrosion; 3. Cables are free of damage; Please also observe applicable standards. Disclaimer of liability SolarWorld does not guarantee the operational capability and functionality of modules if the instructions contained in the present user information are not complied with. Since compliance with these instructions and the conditions and methods of installation, operation, use and maintenance of the modules are not checked or monitored by SolarWorld, SolarWorld accepts no liability for damage arising through improper use or incorrect installation, operation, use or maintenance. Furthermore, liability for infringements of patent law or of other third party rights arising[/vc_column_text][/vc_column][/vc_row]